Shad rods from the premium segment!
Model versions: 2
Shad rods from the premium segment!
Beyond the spinning rods the Morethan Shad Attack series offers also a baitcasting rod, which is both applicable for fishing with soft- and hardbaits. With a length of 2.10m this rod can be conveniently applied from the boat and from the shore. With 14-42g casting weight the Cast Attack accelerates all common shads for perch, zander and pike but also crankbaits and twitchbaits to long distances.
| Article No. | Length | CW | Action | Closed L. | Sect. | Guides | Weight | RRP* |
|---|---|---|---|---|---|---|---|---|
| m | g | cm | g | |||||
11116-210 |
2.10 | 14-42 | ultra fast | 110 | 2 | 10 | 140 | 598.00 € |
* Recommended retail price in €
At our Nanoplus technology the resin material first is enriched with a nanoalloy compound and then is used for connecting the single carbon fibers, thus enabling the design of very lightweight and robust blanks.
Due to the further reduced resin share at the SVF carbon fiber, the resulting rods are even more sensitive and lighter then HVF carbon fiber rods. Blanks made of SVF carbon fiber are extremely fast and instantly transmit contact with the bottom or fishes and perfectly display the lure action. Torque during and after the casts is almost completely eliminated – contributing to more accurate casts. SVF carbon fiber also is exclusively processes in DAIWA rod factories.
Special carbon fiber material for the improvement of the torsion-resistance. Conventional carbon fibers are always layered in a 90° angle – the new X45 material features a 45° angle and is combined with 0° and 90° layered carbon fibers. This construction makes the rods stronger and more distortion-proof.
Despite the increased distortion-proofness the flexibility is maintained. This implies that X45 rods are not only stronger and cast more precisely, but also support the angler at the presentation of delicate lures and at ending the fight with the fish safely.
For the V-Joint Alpha spigot joint, exclusive DAIWA BIAS carbon fiber material is combined with the Nanoplus technology. The carbon fiber nano particles within the material increase its stability and reduce its weight. The spigot joint thus can be dimensioned even slimmer.
We use a technical session cookie (expires at the end of the session). Your full consent to cookies as well as external content provides you with enhanced comfort, and allows us to improve this offer.
Operator of the website:
DAIWA Germany GmbH
Georg-Brauchle-Ring 23-25
80992 Munich
Germany
Telephone: +49 (0)89 309065-0
E-Mail: info@daiwa.de
Company legal form: Gesellschaft mit beschränkter Haftung
Company representative: Shutaro Seki (Executive director)
Registration court: District Court Munich
Trade register / registration number: HRB 47 987 Munich
VAT identification no. according to §27a UStG (German Value Added Tax Act): DE128219782
Tax identification no.: 9117012400333
Responsible chamber: Chamber of industry and commerce for Munich and Upper Bavaria
Daniel Mikulic
Georg-Brauchle-Ring 23-25
80992 Munich
Germany
Tobias Hilfer
Georg-Brauchle-Ring 23-25
80992 Munich
Germany
Information in accordance with §5 TMG (German Telemedia Act)
Liability
We must subject alterations of the printed images and content among the website, the consumer’s catalogue and / or the dealer’s catalog or other data files because of technical reasons.
Kindly observe that DAIWA-Comroran is not responsible for the content or guidelines of data protection of other websites to which daiwa.de, cormoran.de, daiwa-cormoran.de and daiwa-prorex are referring. Despite careful examination, we assume no liability for the content of external links. The operator is exclusively liable for the content of linked sites.
Copyright
Every item of our both product lines (DAIWA & Cormoran) is subject to the copyright of DAIWA Germany GmbH / Globeride Inc. DAIWA allows the transfer of texts and pictures to the database which is only for private use after written consent. The transfer and the use of the data for all other purposes, especially commercial, are prohibited without written consent of DAIWA Germany.
Regarding idea proposals from customers
The DAIWA Germany GmbH / Globeride Inc. (hereinafter, “the Company”) is always conducting unique research and development. We amass ideas and technical knowledge based on these activities. We refrain from accepting idea proposals from customers. This is in order to avoid restrictions on the Company’s research and development activities by accepting such proposals, as well as to prevent future misunderstandings and problems that may arise between customers and the Company.
If a customer makes a proposal regardless of the above policy, we will handle the situation in the following manner:
Uploading of data
You can transmit data, texts and pictures to DAIWA-Comroran in combination with the participation in activities or supply of articles and/or information for the publication on the DAIWA-Comroran website. You confirm with the use of these services that you are the author of these contents and that you own the property of the rights of the use of the data, texts and pictures. At the same time you allow DAIWA-Comroran the free publication of these contents within the scope of the website of DAIWA-Comroran. DAIWA-Comroran is entitled to remove the information from the website with immediate effect by suspicion of misuse of the offered upload services.
Right of withdrawal
The right of withdrawal does not consist with contracts which are concluded with companies or freelancers in the context with their occupational activity or with goods which are made due to consumer’s specification. Since we only sell to retailers (trade) the right of withdrawal is not brought to bear. Additional our general terms and conditions are valid.
Date Updated: 13.10.2023
DAIWA Germany GmbH / Globeride Inc.
PPWR – Packaging Manufacturer Information
Manufacturer Information pursuant to Regulation (EU) 2025/40 (PPWR)
This page provides manufacturer information only for transport packaging for which DAIWA Germany GmbH acts as the Manufacturer within the meaning of Regulation (EU) 2025/40 on packaging and packaging waste (PPWR).
Where such transport packaging bears the QR code referring to this page, the responsible Manufacturer is:
DAIWA Germany GmbH
Georg-Brauchle-Ring 23-25
80992 Munich
Germany
Telephone: +49 (0)89 309065-0
Email: info@daiwa.de
Website: https://en.daiwa.de/
Packaging Identification
For transport packaging for which DAIWA Germany GmbH acts as the Manufacturer, each relevant packaging type is assigned an individual packaging identification number, which is printed on the packaging.
Example: 001
This packaging identification number enables the respective packaging type to be linked to the corresponding technical documentation and EU Declaration of Conformity maintained by DAIWA Germany GmbH.
Scope of this Information
This information applies exclusively to transport packaging for which DAIWA Germany GmbH qualifies as the Manufacturer under Regulation (EU) 2025/40 (PPWR).
It does not mean that all transport packaging used by DAIWA Germany GmbH is manufactured or identified by DAIWA Germany GmbH.
In particular, this page does not apply to transport packaging for which another economic operator is the Manufacturer, including packaging originating from a third country where DAIWA Germany GmbH acts only as the Importer under the PPWR.
The information provided on this page is intended to fulfil the PPWR requirements relating to Manufacturer identification for transport packaging falling within the scope described above.
The relevant technical documentation and EU Declaration of Conformity for such packaging types are maintained by DAIWA Germany GmbH and can be made available to the competent market surveillance authorities upon request.
Further legal information about DAIWA Germany GmbH is available in our Imprint.
Last updated: September 2026